• +91-22-66581601
  • sales@vihasteel.com
  • Mon - Sat: 9:30am - 7:30pm
  • Forged Fittings, Flanges, Fasteners manufacturer

Stainless Steel Flanges suppliers in Thailand

Stainless Steel Pipe Flanges Thailand, ANSI SS Flanges, SS Pipe Flanges, ANSI B16.5 SS Orifice Flange, Stainless Steel Slip On Flanges, SS Spectacle Blind Flange Supplier in Thailand.

ANSI B16.5 SS Ring Type Joint Flanges in Thailand, Distributors of SS Nippolet Flange in Thailand, Importers of Stainless Steel Industrial Flanges in Thailand, ASME SA182 SS Lap Joint Flange in Thailand, ANSI B16.5, ANSI B16.47, B16.48, BS4504, BS 10, EN-1092 Stainless Steel Spacer Flange manufacturers in India, SS Ring Joint Flange, SS Forged Flanges Manufacturer

Viha Steel is a manufacturer & supplier of a huge range of ss flanges in stock for immediate despatch in Thailand. Our range includes BSEN1092-1 (formerly BS4504) flanges, including PN6/ PN10/ PN16/ PN25/ PN40 ratings in slip on, blind, weldneck and threaded form. PN16 rated flanges are stocked to suit hygienic O/D pipe & fittings. Our range covers BS10 flanges in TABLE ‘D’, TABLE ‘E’ and TABLE ‘F’ in slip-on, blind and threaded form. Again, TABLE ‘E’ flanges are stocked to suit Hygienic O/D pipe & fittings. ANSI B16.5 flanges at rating 150LB and 300LB are held in slip-on, blind, threaded and weldneck forms.

Viha Steel is Manufacturers and stockists of High Pressure Stainless Steel Flanges, gaskets, ASTM A182 SS Threaded Flanges, Stainless Steel RTJ Flange, SS WNRF Flanges Exporter, SS Blind Flanges and SS Weld Neck Flange for Civil Construction, Petro Chemical Industry, Power and Energy sector, Gas & Pipeline Industry, Oil and Petrochemical , Water , Heating & Ventilating companies in Thailand.

Our sales agents are available in below locations in Thailand

Bangkok, Thailand
Samut Prakan, Thailand
Nonthaburi, Thailand
Udon Thani, Thailand
Chon Buri, Thailand
Nakhon Ratchasima, Thailand
Hat Yai, Thailand
Pak Kret, Thailand
Si Racha, Thailand
Phra Pradaeng, Thailand
Lampang, Thailand
Chiang Mai, Thailand
Khon Kaen, Thailand
Surat Thani, Thailand
Thanyaburi, Thailand

Our esteemed clients in Thailand

  • PANAPLUS
    Bangna-trad road KM 31 (Thailand)
  • K&I INTERNATIONAL
    Bangkok, Thailand
  • Combined Cycle Power Plant (Thailand)
  • CHEVRON PROJECT (THAILAND)
  • PHUKET PROJECT (THAILAND)
  • PTT PROJECT (THAILAND)
  • CHEVRON PROJECT (THAILAND)
  • ARHIT PROJECT (THAILAND)

Stainless Steel Flanges Thailand

  • Size: 1/2" (15 NB) to 48" (1200NB)
  • Standards: ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
  • ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.
  • ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.
  • Pressure Ratings: Class 150, Class 300, Class 400, Class 600, Class 900, Class1500, Class 2500 | PN6, PN10, PN16, PN25, PN40, PN64 etc.
  • Flange Face Type: Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
  • Coating/Surface Treatment: Anti-rust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanized
  • Value Added Services: CNC Machining, Customised Flanges
  • Types of Flanges: Weld neck Flanges (WNRF), Slip-on Flanges (SORF), Blind Flanges (BLRF), Lap Joint Flanges
    (SOLJ), Socket-weld Flanges (SWRF), Screwed (Threaded) Flanges, Long weld neck Flanges (LWNRF), Spectacle Blind Flanges, Spacer & Blind Flanges, Ring Type Joint Flanges (RTJ), Reducing Flanges, Raised Face (RF) Flanges, Orifice Flanges, Large Diameter Flanges, Custom Flanges, Drawing Flanges, Forged Flanges, Plate Flanges, Flat Face Flanges, etc.

ASTM A182 F304

Stainless Steel 304 Reducing Flanges Suppliers, 304 SS Flanges, Stainless Steel 304 Socket Weld Flanges Exporters, ASME SA182 SS Flanges Dealers, ASTM A182 Blind Flanges manufactures, SS 304 RTJ Flanges, Steel 304 SORF Flanges in Thailand.

  • SPECIFICATION : ASTM A182
  • DIMENSIONS : ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
  • SIZE : 1/2″ (15 NB) to 48″ (1200NB)
  • CLASS :150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64
  • PRESSURE RATINGS : Class 150, Class 300, Class 400, Class 600, Class 900, Class1500, Class 2500 | PN6, PN10, PN16, PN25, PN40, PN64 etc.

ASTM A182 F316L

Stainless Steel 316L Reducing Flanges Suppliers, 316L SS Flanges, Stainless Steel 316L Socket Weld Flanges Exporters, ASME SA182 SS Flanges Dealers, ASTM A182 Blind Flanges manufactures, SS 316L RTJ Flanges, Steel 316L SORF Flanges in Thailand.

  • SPECIFICATION : ASTM A182
  • DIMENSIONS : ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
  • SIZE : 1/2″ (15 NB) to 48″ (1200NB)
  • CLASS :150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64
  • PRESSURE RATINGS : Class 150, Class 300, Class 400, Class 600, Class 900, Class1500, Class 2500 | PN6, PN10, PN16, PN25, PN40, PN64 etc.

Stainless Steel Flanges Pressure Class

  • Stainless Steel Flanges – ASME/ANSI Class 150
    ASME/ANSI B16.5-1996 Pipe Flanges and Flanged Fittings – Class 150 Flanges – outside and inside diameters, bolt circles, numbers and diameters of bolts
  • Stainless Steel Flanges – ASME/ANSI Class 2500 – ASME/ANSI B16.5-1996 Pipe Flanges and Flanged Fittings – Class 2500 Flanges – outside and inside diameters, bolt circles, numbers and diameters of bolts
  • Stainless Steel Flanges – ASME/ANSI Class 900 – ASME/ANSI B16.5-1996 Pipe Flanges and Flanged Fittings – Class 900 Flanges – outside and inside diameters, bolt circles, numbers and diameters of bolts
  • Stainless Steel Flanges – Pressure and Temperature Ratings – Group 1.1 – Maximum temperature and pressure ratings of flanges conforming dimensions ASME B16.5 and materials specification ASTM A-105
  • Stainless Steel Flanges – ASME/ANSI Class 1500 – ASME/ANSI B16.5-1996 Pipe Flanges and Flanged Fittings – Class 1500 Flanges – outside and inside diameters, bolt circles, numbers and diameters of bolts
  • Stainless Steel Flanges – Pressure and Temperature Ratings – Maximum ratings for flanges conforming to ISO Standard 2229 dimensions and material specification AST-A-105
  • Stainless Steel Flanges – ASME/ANSI Class 300 – ASME/ANSI B16.5-1996 Pipe Flanges and Flanged Fittings – Class 300 Flanges – outside and inside diameters, bolt circles, numbers and diameters of bolts
  • Stainless Steel Weld Fittings – ANSI/ASME B36.19 – Dimensions of stainless steel weld fittings according ANSI/ASME B36.19
  • Stainless Steel Flanges – ASME/ANSI Class 400 – ASME/ANSI B16.5-1996 Pipe Flanges and Flanged Fittings – Class 400 Flanges – outside and inside diameters, bolt circles, numbers and diameters of bolts
  • Stainless Steel Flanges – ASME/ANSI Class 600 – ASME/ANSI B16.5-1996 Pipe Flanges and Flanged Fittings – Class 600 Flanges – outside and inside diameters, bolt circles, numbers and diameters of bolts
  • Forged Steel Flanges – Stud Charts – Number of studs, diameter and length for ANSI forged steel flanges ranging class 150 to 1500

Stainless Steel Flanges Price in Thailand

Stainless steel flanges price list India, ss304 flange price list Thailand, ss316 flange price list, Stainless steel blind flange prices, sorf flange price list, blind flange price list, weld neck flange price list, a182 f316 price in Thailand, a182 f304 price in India, b16.5 flange price list Thailand, weld neck flange price list, ansi b16.5 flange price, sa 182 f304 price in Thailand, class 150 flange prices, stainless steel class 150 flanges price

PRICE OF ASTM A182 F304 SORF FLANGES

Type Size Aprox. Wt/ Unit FOB 
INR
CIF
INR
SORF FLANGES ASTM A182 F304 B16.5 150# 15mm 0.49 339.60 370.00
SORF FLANGES ASTM A182 F304 B16.5 150# 20mm 0.61 434.70 472.50
SORF FLANGES ASTM A182 F304 B16.5 150# 25mm 0.90 699.20 760.00
SORF FLANGES ASTM A182 F304 B16.5 150# 32mm 1.13 737.15 801.25
SORF FLANGES ASTM A182 F304 B16.5 150# 40mm 1.48 854.45 928.75
SORF FLANGES ASTM A182 F304 B16.5 150# 50mm 2.37 1164.95 1266.25
SORF FLANGES ASTM A182 F304 B16.5 150# 65mm 3.60 2096.45 2278.75
SORF FLANGES ASTM A182 F304 B16.5 150# 80MM 4.10 2794.50 3037.50
SORF FLANGES ASTM A182 F304 B16.5 150# 100mm 6.04 3105.00 3375.00
SORF FLANGES ASTM A182 F304 B16.5 150# 125mm 6.53 3493.70 3797.50
SORF FLANGES ASTM A182 F304 B16.5 150# 150mm 7.78 4968.00 5400.00
SORF FLANGES ASTM A182 F304 B16.5 150# 200mm 12.98 9004.50 9787.50
SORF FLANGES ASTM A182 F304 B16.5 150# 250mm 17.96 11633.75 12646.25
Type Size Aprox. Wt/ Unit FOB
USD
CIF
USD
SORF FLANGES ASTM A182 F304 B16.5 150# 15mm 0.49 5.197 5.658
SORF FLANGES ASTM A182 F304 B16.5 150# 20mm 0.61 6.586 7.159
SORF FLANGES ASTM A182 F304 B16.5 150# 25mm 0.90 10.594 11.515
SORF FLANGES ASTM A182 F304 B16.5 150# 32mm 1.13 11.169 12.140
SORF FLANGES ASTM A182 F304 B16.5 150# 40mm 1.48 12.946 14.072
SORF FLANGES ASTM A182 F304 B16.5 150# 50mm 2.37 17.651 19.186
SORF FLANGES ASTM A182 F304 B16.5 150# 65mm 3.60 31.764 34.527
SORF FLANGES ASTM A182 F304 B16.5 150# 80MM 4.10 42.341 46.023
SORF FLANGES ASTM A182 F304 B16.5 150# 100mm 6.04 47.045 51.136
SORF FLANGES ASTM A182 F304 B16.5 150# 125mm 6.53 52.935 57.538
SORF FLANGES ASTM A182 F304 B16.5 150# 150mm 7.78 75.273 81.818
SORF FLANGES ASTM A182 F304 B16.5 150# 200mm 12.98 136.432 148.295
SORF FLANGES ASTM A182 F304 B16.5 150# 250mm 17.96 175.420 190.761

Click here for more Stainless Steel Flanges Price

RFQ

Stainless Steel flanges pressure rating

PRESSURE-TEMPERATURE RATINGS FOR ASTM GROUP 2-1.1 MATERIALS
WORKING PRESSURE BY CLASSES, BAR

TEMP
°C
150 300 400 600
-29 TO 38 19.6 51.1 68.1 102.1
50 19.2 50.1 66.8 100.2
100 17.7 46.6 62.1 93.2
150 15.8 45.1 60.1 90.2
200 13.8 43.8 58.4 87.6
250 12.1 41.9 55.9 83.9
300 10.2 39.8 53.1 79.6
325 9.3 38.7 51.6 77.4
350 8.4 37.6 50.1 75.1
375 7.4 36.4 48.5 72.7
400 6.5 34.7 46.3 69.4
425 5.5 28.8 38.4 57.5
450 4.6 23 30.7 46
475 3.7 17.4 23.2 34.9
500 2.8 11.8 15.7 23.5
538 1.4 5.9 7.9 11.8
TEMP
°C
150 300 400 600

PRESSURE-TEMPERATURE RATINGS FOR ASTM GROUP 2-1.1 MATERIALS
WORKING PRESSURE BY CLASSES, BAR

TEMP
°C
900 1500 2500
-29 TO 38 153.2 255.3 425.5
50 150.4 250.6 417.7
100 139.8 233 388.3
150 135.2 225.4 375.6
200 131.4 219 365
250 125.8 209.7 349.5
300 119.5 199.1 331.8
325 116.1 193.6 322.6
350 112.7 187.8 313
375 109.1 181.8 303.1
400 104.2 173.6 289.3
425 86.3 143.8 239.7
450 69 115 191.7
475 52.3 87.2 145.3
500 35.3 58.8 97.9
538 17.7 29.5 49.2
TEMP
°C
900 1500 2500

PRESSURE-TEMPERATURE RATINGS FOR ASTM GROUP 2-2.3 MATERIALS
WORKING PRESSURE BY CLASSES, BAR

TEMP
°C
150 300 400 600
-29 TO 38 15.9 41.4 55.2 82.7
50 15.3 40 53.4 80
100 13.3 34.8 46.4 69.6
150 12 31.4 41.9 62.8
200 11.2 29.2 38.9 58.3
250 10.5 27.5 36.6 54.9
300 10 26.1 34.8 52.1
325 9.3 25.5 34 51
350 8.4 25.1 33.4 50.1
375 7.4 24.8 33 49.5
400 6.5 24.3 32.4 48.6
425 5.5 23.9 31.8 47.7
450 4.6 23.4 31.2 46.8
TEMP
°C
150 300 400 600

PRESSURE-TEMPERATURE RATINGS FOR ASTM GROUP 2-2.3 MATERIALS
WORKING PRESSURE BY CLASSES, BAR

TEMP
°C
900 1500 2500
-29 TO 38 124.1 206.8 344.7
50 120.1 200.1 333.5
100 104.4 173.9 289.9
150 94.2 157 261.6
200 87.5 145.8 243
250 82.4 137.3 228.9
300 78.2 130.3 217.2
325 76.4 127.4 212.3
350 75.2 125.4 208.9
375 74.3 123.8 206.3
400 72.9 121.5 202.5
425 71.6 119.3 198.8
450 70.2 117.1 195.1
TEMP
°C
900 1500 2500

Stainless Steel flanges dimensions

Stainless Steel Flanges – ASME/ANSI Class 150
ASME/ANSI B16.5-1996 Pipe Flanges and Flanged Fittings – Class 150 Flanges – outside and inside diameters, bolt circles, numbers and diameters of bolts

ASME/ANSI B16.5-1996 Pipe Flanges and Flanged Fittings – Class 150 Flanges – outside and inside diameters, bolt circles, numbers and diameters of bolts for Weld neck, Threaded, Slip-on, Lap joint, Socket weld and Blind flanges.

Stainless Steel qualities according ASME B16.5 Table 1A.

Pipe Size
Inch
Flange OD
Inch
Pipe OD
Inch
No. of Bolt Holes Bolt Hole Dia
Inch
Bolt Circle
Inch
1/2 3-1/2 0.84 4 5/8 2-3/8
3/4 3-7/8 1.05 4 5/8 2-3/4
1 4-1/4 1.32 4 5/8 3-1/8
1-1/4 4-5/8 1.66 4 5/8 3-1/2
1-1/2 5 1.90 4 5/8 3-7/8
2 6 2.38 4 3/4 4-3/4
2-1/2 7 2.88 4 3/4 5-1/2
3 7-1/2 3.50 4 3/4 6
3-1/2 8-1/2 4.00 8 3/4 7
4 9 4.50 8 3/4 7-1/2
5 10 5.56 8 7/8 8-1/2
6 11 6.63 8 7/8 9-1/2
8 13-1/2 8.63 8 7/8 11-3/4
10 16 10.75 12 1 14-1/4
12 19 12.75 12 1 17
14 21 14.00 12 1-1/8 18-3/4
16 23-1/2 16.00 16 1-1/8 21-1/4
18 25 18.00 16 1-1/4 22-3/4
20 27-1/2 20.00 20 1-1/4 25
24 32 24.00 20 1-3/8 29-1/2

1) Recommended bolts are 1/8 smaller than the nominal bolt hole diameters shown.

  • 1 inch = 25.4 mm

Stainless Steel flange standard

ASTM Standards

  • Duplex 2205, Duplex SAF 2205, Duplex SAF2205, Duplex UNS S31803, Din 1.4462 EN 10088 F51
    Duplex SAF2205 SANMAC, URANUS 45N, PREN=33, PREN=34, PREN=35, PREN=36 DIN 1.4462
    Duplex-2205 UNS S31803 / UNS S32205 DIN-1.4462 EN 10088-3 PREN = 33, PREN = 34, PREN = 35
    Super Duplex 2507, Super Duplex SAF 2507, Super Duplex SAF-2507, Super Duplex UNS S32750 F53
    Super Duplex SAF 2507 UNS S32750 DIN 1.4410 EN-10088 URANUS 47N(+) PREN=41 Minimum
    Super Duplex UNS S32760 F-55 ASTM A182 F55 SA182 F-55 DIN 1.4501 UNS 32760 F55
  • ASTM A182 F304, F304L, F316, F316L, F321, F321H, F347, F347H, F309S, F310S STAINLESS STEEL SLIPON FLANGES, BLIND FLANGES, WELD NECK FLANGES, THREADED & SOCKET WELD FLANGES, LAP JOINT FLANGES

ANSI B16.5
MSS-SP 44
API 605
AWWA 207
BS TABLE D, E, F, H, J, K
ASA 150, 300, 600, 900, 1500, 2500 lbs
DIN ND 6, 10, 16, 25, 40

ASTM A182 Stainless Steel flange weight

ANSI B16.5 -½ “-24” FORGED FLANGES

CLASS 150
NPS  Slip On  Thread SWRF Lap Joint BLRF WNRF
½  1 1 2 1 2 2
¾ 2 2 2 2 2 2
1 2 2 2 2 2 3
3 3 3 3 3 3
1½  3 3 3 3 4 4
2    5 5 5 5 5 6
2½  8 8 8 8 7 10
3    9 9 9 9 9 11.5
3½  11 12 11 11 13 12
4    13 13 13 13 17 16.5
5    15 15 15 15 20 21
6    19 19 19 19 27 26
8    30 30 30 30 47 42
10    43 43 43 43 70 54
12    64 64 64 64 123 88
14    90 90 90 105 140 114
16    106 98 98 140 180 140
18    130 130 130 160 220 165
20    165 165 165 195 285 197
22    185 185 185 245 355 225
24    220 220 220 275 430 268
CLASS 300 lb
NPS  Slip On  Thread SWRF Lap Joint BLRF WNRF
½ 2 2 3 2 2 2
¾ 3 3 3 3 3 3
1    3 3 3 3 4 4
4.5 4.5 4 4.5 6 5
1½  6.5 6.5 6 6.5 7 7
2    7 7 7 7 8 9
2½  10 10 10 10 12 12
3    13 14 13 14.5 16 18
3½  17 17 17 17 21 20
4    23.5 24 22 24 28 26.5
5    29 31 28 28 37 36
6    39 39 39 39 50 45
8 58 58 58 58 81 69
10 81 81 81 91 124 100
12 115 115 115 140 185 142
14 165 165 165 190 250 206
16 210 220 190 234 315 250
18 253 280 250 305 414 320
20 315 325 315 375 515 400
22 370 370 370 435 640 465
24 490 490 475 550 800 580
CLASS 400 lb
NPS  Slip On  Thread SWRF Lap Joint BLRF WNRF
½  2 2 2 2 2 3
¾ 3 3 3 3 3 3.5
1 3.5 3.5 3.5 3.5 4 4
4.5 4.5 4.5 4.5 6 4.5
1½  6.5 6.5 6.5 6.5 8 8
2    8 8 8 8 10 10
2½  12 12 12 11 15 14
3    15 15 15 14 20 18
3½  21 21 21 20 29 26
4    26 26 26 25 33 35
5    31 31 31 29 44 43
6    44 44 44 42 61 57
8    67 67 67 64 100 89
10    91 91 91 110 155 125
12    130 130 130 152 226 175
14    191 191 191 210 310 233
16    253 253 253 280 398 295
18    310 310 310 345 502 360
20    378 378 378 420 621 445
22    405 405 405 455 720 505
24    539 539 539 615 936 640
CLASS 600 lb
NPS  Slip On  Thread SWRF Lap Joint BLRF WNRF
½ 2 2 2 2 3 3
¾ 3 3 3 3 4 4
1    4 4 4 4 4 4
5 5 5 5 6 6
1½  7 7 7 7 8 8
2    9 9 9 9 10 12
2½  13 13 13 12 15 18
3    16 16 16 15 20 23
3½  21 21 21 20 29 26
4    37 37 37 36 41 42
5    63 63 63 63 68 68
6    80 80 80 78 86 81
8 115 115 115 112 140 120
10 177 177 177 195 231 190
12 215 215 215 240 295 226
14 259 259 259 290 378 347
16 366 366 366 400 527 481
18 476 476 476 469 665 555
20 612 612 612 604 855 690
22 590 590 590 670 1000 720
24 876 876 876 866 1250 977

We offer special price in Thailand for:

  • ASTM A182 F304, F304L, F304H, F310S, F316, F316L, F316H, F321, F321H, F347, F347H, F348 in Thailand
  • ASTM A182 F1, F11, F12, F22, F5, F9, F91, F92
  • ASTM A182 F-1, F-11, F-12, F-22, F-5, F-9, F-91, F-92
  • Stainless Steel 304 Flanges
  • Stainless Steel 304L Flanges
  • Stainless Steel 304H Flanges
  • Stainless Steel 310S Flanges
  • Stainless Steel 316 Flanges
  • Stainless Steel 316L Flanges
  • Stainless Steel 316H Flanges
  • Stainless Steel 316TI Flanges
  • Stainless Steel 317/317L Flanges
  • Stainless Steel 321/321H Flanges
  • Stainless Steel 347/347H Flanges
  • Stainless Steel 904L Flanges

Stainless Steel Flanges Grades

Stainless Steel Flanges For Sale in Thailand

We export these Stainless Steel Flanges globally such as Peru, United States, Philippines, Canada, United Kingdom, United Arab Emirates, Singapore, Malaysia, Saudi Arabia, Indonesia, Thailand, Pakistan, Qatar, Australia, South Korea, South Africa, Iran, Turkey, Italy, Germany, Oman, Taiwan, Nigeria, Vietnam, Egypt, Mexico, Spain, Bahrain, Kuwait, Hong Kong, Netherlands, Bangladesh, Israel, Poland, Brazil, Norway, Sri Lanka, New Zealand, France, Finland, Romania, Denmark, Japan, Belgium, Russia, Kenya, Ireland, Greece, Portugal, Hungary, Serbia, Croatia, Bulgaria, Venezuela, Lithuania, Myanmar (Burma), Colombia, Azerbaijan, Iraq, Brunei, Laos, Cambodia, China, Czech Republic, Algeria, Chile and Croatia.

Viha Steel & Forging


Plot No 02 Ground Floor, Gardanchs LTD Bhajekar Street, Opp 11 Khetwadi Man Road, Prathna Samaj, Khetwadi, Girgaon, Mumbai, Maharashtra 400004, INDIA
Tel: +91-22-66581601 |Email: sales@vihasteel.com

What’s New, check stock & price in Thailand

  • High Quality ASTM A182 F304 Flange Thailand
    Price: US $10-200 / Piece
    10 Pieces (Min. Order)
  • Forged SO Flange 150LB ASTM A182 F304 Slip on Flanges
    Price: US $1-1000 / Piece
    1 Perch (Min. Order)
  • ASTM A182 F304 stainless steel pipe flange Thailand
    Price: US $1-100 / Piece
    100 Pieces (Min. Order)
  • ISO PED TUV LROA ASTM B16.47 A182 F304 304L 316 316L stainless steel pipe flange
    Price: US $1.0-10.0 / Piece
    1 Piece (Min. Order)
  • ASME 16.5 150# ASTM A182 F304 NPS 4" Sch-STD Long Welding Neck Flange RF Price : 154.83 USD/PC
    Price: US $154.83 / Piece
    1 Piece (Min. Order)
  • ANSI B16.5 Threaded Flanges, ASME B.16.5 Threaded Pipe Flanges, DIN Threaded Flanges
    Price: US $5-50 / Piece
    10 Pieces (Min. Order)
  • 2" CL150 STD Stainless Steel A182 F304 ANSI B16.5 WNRF FLANGE
    Price: US $3-125 / Piece
    10 Pieces (Min. Order)
  • F904L,F321,F316L,F304/304L,F310 Stainless steel flange Thailand
    Price: US $10-150 / Piece
    1 Piece (Min. Order)
  • ASTM A182 f304 304l jis standard 10k jis flange Thailand
    Price: US $1.0-10.0 / Piece
    1 Piece (Min. Order)
  • ASTM A182 F304 Stainless Steel Forging SCRD Flange
    Price: US $10-200 / Piece
    10 Pieces (Min. Order)
  • ASTM A182 f304 stainless steel flange Thailand
    Price: US $5-100 / Piece
    1 Piece (Min. Order)
  • Reasonable Price ASTM A182 pipe fitting top stainless steel flange ASTM A182 F304
    Price: US $1-50 / Piece
    20 Pieces (Min. Order)
  • ASTM A182 F304 stainless steel pipe flange No China
    Price: US $1-10 / Piece
    1 Piece (Min. Order)
  • ASTM A182 f304 f304l flange astm b 16.5 standard flange Thailand
    Price: US $1.9-183.8 / Piece
    1 Piece (Min. Order)
  • 22. 1/2 to 12 inch B16.5 150LB ASTM A182 F304/ F304L blind BL flange
    Price: US $1-800 / Piece
    10 Pieces (Min. Order)
  • ASTM A182 f347 stainless steel flanges SW 1" 300LB RF SCH80S A182 F304 ASME B16.5 FLANGE
    Price: US $0.1-10 / Piece
    100 Pieces (Min. Order)
  • Professional manufacturers lap joint ASTM A182 f304 stainless steel pipe flange
    Price: US $1-5 / Piece
    1 Piece (Min. Order)
  • ASTM A182 F304 stainless steel forging scrd flange Thailand
    Price: US $1-10 / Piece
    1 Piece (Min. Order)
  • A182 F304 stainless steel flange nut sleeve anchor/ASTM A182 forged stainless steel flange
    Price: US $1.5-200 / Piece
    1 Piece (Min. Order)
  • Amse B16.5 ASTM A182 F304 316 Stainless Steel Rf Blind Flange
    Price: US $1000-3000 / Ton
    1 Ton (Min. Order)
  • ASTM A182 F304 super duplex stainless steel flange f61
    Price: US $1-10 / Piece
    1 Piece (Min. Order)
  • Manufacturer ASTM A182 F304 stainless steel class 150 plate flange for sale
    Price: US $3-20 / Piece
    30 Pieces (Min. Order)
  • ASTM A182 F304 150lb RF Threaded Flange Thailand
    Price: US $1-999 / Piece
    1 Piece (Min. Order)
  • A182 F304 stainless steel flange nut sleeve anchor ,BG ASTM A182 f304 welded collar flange
    Price: US $500-2000 / Ton
    1 Ton (Min. Order)
  • ASTM A182 F304 Stainless Steel Forged Socket Weld Flange Thailand
    Price: US $0.2-2000 / Piece
    1 Piece (Min. Order)
  • Forged SO Flange 150LB ASTM A182 F316L Slip on Flanges
    Price: US $1-1000 / Piece
    1 Perch (Min. Order)
  • ASTM A182 f316l stainless steel flange Thailand
    Price: US $10-100 / Piece
    5 Pieces (Min. Order)
  • ASTM A182 F316L Stainless Steel Weld Neck Flanges ,150LB
    10 Sets (Min. Order)
  • ASTM A182 f316l stainless steel flange
    Price: US $1-500 / Piece
    1 Piece (Min. Order)
  • ASTM A182 f316l stainless steel weld neck rfwn Flange Thailand
    Price: US $0.99-499 / Piece
    1 Piece (Min. Order)
  • ASTM A182 F316L WNRF SORF BL RF Stainless Steel Flange
    Price: US $1600-2400 / Metric Ton
    1 Metric Ton (Min. Order)
  • Factory direct sale stainless steel flange ASTM A182 F316L
    Price: US $0.1-50 / Piece
    100 Pieces (Min. Order)
  • ANSI ASTM A182 A351F304 F316 F316L Stainless Steel Flange
    Price: US $0.1-10 / Piece
    10 Pieces (Min. Order)
  • 304 and 316 ASTM A182 f316l stainless steel flange Thailand
    Price: US $1-100 / Piece
    1 Ton (Min. Order)
  • good ASTM A182 f316l stainless steel flange,321 stainless steel flange
    Price: US $1000-3000 / Ton
    0.5 Tons (Min. Order)
  • Class 150 ASTM A182 F316l Stainless Steel Flange Thailand
    Price: US $10-200 / Piece
    10 Pieces (Min. Order)
  • F304L,F316,F316L,F321 ASTM A182 f316l stainless steel flange
    Price: US $1-10 / Piece
    1 Piece (Min. Order)
  • ASTM A182 f316l stainless steel flanges
    Price: US $1-10 / Piece
    1 Piece (Min. Order)
  • ASTM A182 f316l stainless steel flange Thailand
    Price: US $10-1000 / Piece
    10 Pieces (Min. Order)
  • Factory direct sale stainless steel flange ASTM A182 F316L
    Price: US $20.0-50.0 / Pieces
    10 Pieces (Min. Order)
  • ASTM A182 f316l stainless steel flange Thailand
    Price: US $100.0-999.0 / Piece
    1 Piece (Min. Order)
  • Good Quality ASTM A182 f316l Stainless Steel Flanges, 321 Stainless steel Flanges Price
    Price: US $5-100 / Piece
    20 Pieces (Min. Order)
  • ASTM A182 lf2 blind f316l stainless steel flange Thailand
    Price: US $7.8-18.9 / Piece
    10 Pieces (Min. Order)
  • ASTM A182 F316L WNRF SORF BL RF Stainless Steel Flange
    Price: US $3-50 / Piece
    1 Piece (Min. Order)
  • ASTM A182 F316L WNRF SORF BLRF Stainless Steel Flange
    Price: US $0.1-99 / Piece
    10 Pieces (Min. Order)
  • Supplying ASTM A182 f316l stainless steel flange Thailand
    Price: US $5-50 / Piece
    10 Pieces (Min. Order)
  • ANSI ASTM A182 A351F304 F316 F316L Stainless Steel Flange
    Price: US $5-200 / Piece
    1 Piece (Min. Order)
  • 1 2 3 4 inch B16.5 150LB ASTM A182 F316/ F316L blind BL RF FLG flange
    Price: US $1-800 / Piece
    10 Pieces (Min. Order)
  • Plate flange ASTM A182 f316l stainless steel flat plate flange Thailand
    Price: US $1.9-183.8 / Piece
    1 Piece (Min. Order)

Other Industrial Products we supply in Thailand

© Copyright 2018 | Website & SEO by Mesotek